The DREDGE Pump is purpose made for the MOBITRAC.
The MB-LL80B-4 can be used for sediment pumping and also for the pumping of algea, beach cleaning, or collection of other debris that is floating in the water.

The pump is be regulated from a start panel near the driver seat.

Upon request a feeding screw can be added to the front of the pump. This device will then loosen the bottom to give the pump an even flow of sediment. Only when the exact nature of the material to be dredged is known should this be used.

When the sediments are other than light and soft material, it may be wise to discuss the type of pump you may need.

Dredge Pump



A dredge pump for dredging slurry from ponds and other water areas. Specially designed to fit on the liftarm of the TR-Classic MOBITRAC

  • working depth 2000 mm
  • Weight 65 kg
  • Pumping distance 150 m
  • Max. FLOW per hour 60m³


The MB-F 209 cutter is easily attached to the front of the machine and its hydraulics. This double acting ESM Busati knife bar doesn’t require water for lubrication. Therefore it can also be used on shore, shallow waters and even marshlands.

The MB-F 209 has a powerful cutting capacity and could be used for thicker reeds.


Waterways and marshland sites don’t always get the attention they deserve. In some cases this results in an outbreak of noxious weeds, reeds and water plants which also alters the natural streaming.

In addition thiscan eventually cause environmental inconveniences:
Swamp-formation, plagues, decompositions, drainage problems, stinking water sources etc. Periodic maintenance by mowing and harvesting is essential.

Typical sites for efficient appliances

  • Natural parks and reservoirs
  • Private and public ponds
  • Marshland and River effluents


MR-R350 Collecting Rake


  • Width: 11.5 pies 2 – 3,50 m
  • Weight: 63 kg

MR-R209 Sweeping Rake

  • Width: 2,10 M
  • Weight: 30 KG

© Copyright - Mobitrac